Single Handle Basin Faucet
“ALWAYS QUALITY, ALWAYS VICO”. Item no.: 82401 Single handle basin faucet The single handle basin faucet with 35mm ceramic cartridge is smaller than the one with 40mm cartridge, but it still looks compact and delicate instead of narrow and small. The classical cylinder shape is applied on the...
“ALWAYS QUALITY, ALWAYS VICO”.
Item no.: 82401
Single handle basin faucet
The single handle basin faucet with 35mm ceramic cartridge is smaller than the one with 40mm cartridge, but it still looks compact and delicate instead of narrow and small. The classical cylinder shape is applied on the main body and mixer handle. The complete image is in good taste. The designer wishes to allow the single handle basin faucet could match the whole style of smaller washing room. Normally small sized bathroom is very often appearing as the second bathroom in villa, country cottage and down town small-sized apartment. If bigger sized mixer is fixing in small toilet, it really would not be well matched and destroy the complete decoration effect. The height of the single lever basin mixer is nearly the same as the similar model with 40mm, while with a little bit shorter on the centre distance from the aerator and the body. The front end face is flat and easy for users to control and avoid slipping.
The material of the single handle basin faucet main part is applied with high grade of brass, while with fine well chrome plated processing. It could be durable in long-term in the humid atmosphere of the bathroom. The anti-corrosion has been tested by the lab and gets a well feedback by end users. The surface treatment is normally proceeding with several times to avoid any missing corner. Before packed, all single handle basin taps need to pass the water testing one by one for each finished item. The testing pressure is normally the same as actual working pressure or higher, which may be fully tested before selling. This essential step of inspection is significant for the quality control, which could prevent the unqualified items running into the market and end-users.
The pair of stainless steel knitted hoses are normally packed in the same box while packed with poly bag to be separated from the single handle basin mixer, so as to avoid any scratch on the chrome plated surface. There is 35cm and 40cm length for common choices. If the basin is on the lower platform, 35cm is enough for the connection with the wall mounted angle valves. While for the higher table, it might be 40cm for the right size. All the knitted hoses could be decided by the end customer. The fixing parts are also packed in another poly bag and then put into the box of the single handle basin mixer. All these fittings are separated by inner card board to avoid mutual friction during long distance transportation to the destination. The pop up is also available if needed.