Faucet installation method

- Dec 19, 2017 -

1. single hole basin faucet installation

Buy a single handle should pay attention to the market most of the nozzle diameter, which belongs to the hard pipe water, so you should pay attention to reserve the nozzle height is 35 centimeters from the basin down the most appropriate. When installing, a special angle valve must be selected, and the angle valve must be fixed with the cold and hot water pipe of the wall. When you find the distance between the angle valve and water pipe, to buy a special extension tube to connect. Remember, do not use other water pipes to connect, because if the water pressure is large, it is easy to fall off, leaking water, causing loss to you. If the water inlet pipe is too long over water, according to your needs take part, angle of inappropriate words according to the need to moderate bend to your desired position. Remember: do not bend hard to 90 degrees or more than 90 degrees. When installing the basin for water, please do not forget to buy the small interface of the faucet (short tap). Before you install it, please don't forget to get the water pipe buried in the wall ahead of time.

2. installation of shower and bathtub faucet (hanging wall)

When you have bought a shower, a bathtub, and a wall faucet, you can choose the right high water pipe. The distance between hot and cold water pipes must be 15 centimeters. Before installation, you must not forget to wash the water pipe, so as to avoid the water quality and cause damage to the faucet.

Dark shower, Bathtub Faucet: after the purchase of dark faucet, the head of the head is usually buried in the wall. Be sure to pay attention to the thickness of the bathroom wall before burying. If the wall is too thin, the spool will not be buried. The plastic cover of the valve core should not be easily removed when buried, so as to avoid damage to the valve core of cement and other miscellaneous duties when buried. In addition to the preburied valve core should also pay attention to the direction of the valve core up and down, left and right, so that the valve core is not buried. Wall mounted faucet pre buried water tube size deviation, can be used for calibration by adjusting guaizi.

3. installation of constant temperature faucet

Before installing the thermostatic tap, please check whether the water pipe is left hot and right cold. Remember not to install the hot and cold water pipes so that the faucet will not work properly. The gas and solar water heaters can't use the thermostat, because the water pressure is too low. Install the thermostat, please do not forget to install the cold and hot water filter.

4. Single Hole Kitchen Faucet Installation

The requirement is stable, because the frequency of the kitchen faucet is high, and it is moved and moved. It is very easy to loose, so the lock nut must be tightened. Some leading faucets on the market appear to be fixed by solenoid tubes and nuts. This stabilizing effect is very good. If we can solve the problem of water lifting, it will become a popular trend in the future.